|
|
|
|
|
|
V-Block Barrel Stabilizer
|
Our Price: $24.96
|
|
|
Eliminate Barrel Droop!!! Improve the accuracy from your 10/22 or 10/17. V-Block is an integral part of our Accuracy System and should be ordered along with Bedding Kit.
|
|
|
|
|
|
|
|
|
|
Extended Magazine Release
|
|
Our Price: $21.96
|
|
|
Quick and easy drop-in installation, this conventional type extended magazine release has color and stying choices made to match our other action components.
|
|
|
|
|
|
|
|
|
|
Full Width Trigger
|
|
Our Price: $29.96
|
|
|
One of our most popular products, these triggers set the standard for performance on a 10/22 factory based trigger group. The Full Width uses all of the available room by opening up the trigger window in your trigger group housing with about ten minutes or less worth of simple modifications following the included well written instructions.
|
|
|
|
|
|
|
|
|
|
Mid-Weight Charging Handle Assembly
|
|
Our Price: $42.96
|
|
|
Designed with the HM2 conversion in mind, these handles tame the HM2 pressure curve for use on a 10/22 action. They can also be used where ever their stout, one piece shanks are needed to take the puishment of high power ammo such as 22MAG, or HMR. Stainless guide rod and special progressive spring included.
|
|
|
|
|
|
|
|
|
|
77/22 Barrel Spacer Kit
|
List Price: $24.96
Our Price: $22.96
You save $2.00!
|
|
|
The precision engineered kit allows you to use a barrel from the Ruger 77/22 in a 10/22 receiver. The kit makes it easy to convert your 10/22 using the 77/22 barrel . The kit is designed to work with the Adjustable V-Block and will drop straight in when using one, or, you may modify a factory V-Block and fit it yourself.
This kit works on the 22 Magnum, and it also adapts a 77/XX barrel to the Model 96 lever action as well.
|
|
|
|
|
|
|
|
|
|
920 Thread Cap
|
|
Our Price: $19.96
|
|
|
Protect your expensive barrel with our Ultimate 920 bull barrel threaded cap. The cap protects the threads AND the barrel crown from harm. Conventional thread protectors do not protect the muzzle. Our CNC machined 4140 chrome-moly steel caps are hot blued using the same high quality process as top name manufacturers for a long lasting finish.
|
|
|
|
|
|
|
|
|
|
Magazine Pull Release
|
|
Our Price: $29.96
|
|
|
Magazine Pull Release
|
|
|
|
|
|
|
|
|
|
Deluxe Hammer and Adjustable Sear Kit
|
|
Our Price: $69.96
|
|
|
The deluxe kit comes with a fully Precision cut Hammer and adjustable Sear. No other adjustable sear can match the performance to remove creep and pre-travel from your trigger group build. Our sear has been cut so close to perfect that the adjustment set screw is often not even used. The tighter tolerance hammer bushings are just what is needed to help get all of the available performance, along with precision over-sized hammer and trigger pins.
|
|
|
|
|
|
|
|
|
|
V-Block Machined Screws
|
|
Our Price: $5.96
|
|
|
The specially shouldered V-Block/Barrel attachment machined screws have a clean, supportive shoulder in the important V-Block pass through area. This shoulder aids in further aligning the V-Block and the barrel connection and ultimately helps to completely eliminate any Point Of Impact changes.
|
|
|
|
|
|
|
|
|
|
Hammer Bushing
|
|
Our Price: $6.96
|
|
|
Our Hammer Bushings are made from Ordnance grade carbon steel and are designed to work with ANY Factory or aftermarket factory single stage designed Hammer.
|
|
|
|
|
|
|
|
|
|
10/22 Custom Billet Safety
|
|
Our Price: $14.96
|
|
|
The R/T Custom Safety is just the thing for the custom trigger group project. A direct replacement for a factory standard safety, their knurled pushbutton design will fit a factory trigger group housing or our own CNC’ed billet housing.
|
|
|
|
|
|
|
|
|
|
Hammer Bushing Combo Pack
|
|
Our Price: $10.96
|
|
|
Our Hammer Bushings are made from Ordnance grade carbon steel and are designed to work with ANY Factory or aftermarket factory single stage designed Hammer.
|
|
|
|
|
|
|
|
|
|
Hammer Pin Kit
|
|
Our Price: $5.96
|
|
|
Conveniently available in single or two Pin Combo Packs, the R/T Hammer Pin is designed with close tolerances specifically for the R/T Hammer Bushings. They also improve the performance of factory Hammer Bushings by removing excessive tolerance from the assembly. Better tolerances, better, crisper let off.
|
|
|
|
|
|
|
|
|
|
10/22 5MOA Picatinny Scope Rail
|
|
Our Price: $36.96
|
|
|
Check out Our New Colors. Tactical Picatinny Scope Rail
|
|
|
|
|
|
|
|
|
|
10/22 20MOA Picatinny Scope Rail
|
|
Our Price: $37.96
|
|
|
Tactical 20 MOA Picatinny Scope Rail
|
|
|
|
|
|
|
|
|
|
Action Takedown Tool Kit
|
|
Our Price: $17.96
|
|
|
10/22 Action Takedown Tool Kit for complete action tuning/dis-assembly, assembly,R/T scope rail and single pivot auto bolt release installations.
|
|
|
|
|
|
|
|
|
|
Ruger 10/22 Trigger Return Torsion Spring Kit
|
|
Our Price: $12.96
|
|
|
A simple to install kit that provides the finest trigger actuation on any 10/22 Trigger Group.
|
|
|
|
|
|
|
|
|
|
Ruger 10/22 Stage 1 Bedding Kit
|
|
Our Price: $29.96
|
|
|
Tunable bedding kit for the Ruger 10/22, Model 96, Charger Pistol or 77/22 action. Tune your action to the ammo, or maximize the potential of a given ammo.
|
|
|
|
|
|
|
|
|
|
Ruger 10/22 Adjustable/Tune-able Bedding Kit Stage 2 kit
|
|
Our Price: $44.96
|
|
|
Tunable bedding (full front and rear) kit for the Ruger 10/22, Model 96, and Charger Pistol actions. Tune your action to the ammo, or maximize the potential of a given ammo.
|
|
|
|
|
|
|
|
|
|
.750" Fluted and Knurled 1/2X28 Rimfire Thread Protector
|
|
Our Price: $20.96
|
|
|
New for Fall 2010, these thread protectors are a very versatile design that will add a lot of class to your project.
Originally made to compliment our new .750 Heavy Sporter Taper Tensioned Barrels, and to match our existing fluted and knurled charging handles and magazine release extensions for the 10/22, we were pleasantly surprised when we tried one of these on our Smith and Wesson 422 pistol and found it to be light years better than the cheesy little protector that most are using.
|
|
|
|
