 |
 |
 |
 |
The Reverse Blow Compensator operates on the same principle as the Barrett compensators. It uses the available pressure from the exhaust gases to help cancel and remove recoil. On a Barrett this is helpful because there is a lot of recoil. On a Rimfire it is helpful because now you get to see the impact in your scope as well as the rest or hold position is much easier to keep consistent from shot to shot regardless of venue, whether it be on a bench, Varminting, or offhand. This increased ease of consistency adds to better performance and better accuracy results. Made from billet aircraft aluminum with true class 2A threads carefully installed concentric to the bore, the R/T Reverse Blow Compensator is an effective tool on any .920 or .750 rimfire barrel that is already threaded industry standard 1/x28 for accessories. Hard coat MIL-Spec anodized for years of rugged use. The Compensator simply threads on by hand, and a small dab of blue Lock-Tite or similar may be used for a semi-permanent installation which can still be removed easily if another barrel accessory is desired. Finally a Compensator that improves actual performance on a rimfire barrel, it doesn’t just look cool! |
|
 |
 |
|
 |
 |
 |
 |
 |
Features
- 1/2"-28 standard US threads
- Hard Coat Anodized
- .920 Diameter for Bull barrels
- Made from aircraft aluminum
|
|
 |
 |
 |
 |
|
 |

|